The panoramic view of the toilet bowl is on every grain

There is no need for specialized tools, no need for a clerk, just use a tape or a patch so you can easily clog the bridge simply.

How to switch the toilet with adhesive tape

The clogged toilet is one of the things that annoys many of us. You can clear the toilet in many ways, but today we will introduce an extremely " method " through the article below. Think of the scene one day, your toilet is clogged like this. What will you have to do?

The first thing you need to do is clean the pedestal around the toilet.

Next, paste a large patch on the surface of the toilet. Note, you need to make sure that the seal is around, not leaving any openings. You can also use tape, or a piece of nylon, to wrap around the toilet, and then tighten the corners.

Tighten the edges so that the patch does not pop out.

You can also use adhesive tape or nylon.Be sure to make sure that the tape or nylon must be strong enough not to burst.

The next step is to shock the water, at the same time, you press your hand hard in the middle. If using nylon or adhesive tape, you need to make sure the paste is strong enough to not inflate when the water pressure pushes up, otherwise the consequences will be extremely . "catastrophic".

And miraculously, the toilet has passed.

Why is that?

To understand why this patch can do so, we must first consider the mechanism of the toilet enema.

When placing the retriever in the toilet hole, make sure the rubber tip covers the entire water pipe and press down. The air inside the rubber sponge will be pushed into the toilet bowl, forming a compression pressure.

Then when pulled out, the rubber tube will suck up air and water, forming a vacuum.The pressure created when repeating this process will cause the object to clog off the tube, allowing the toilet to return.

The principle of the patch is essentially the same as the rubber enema, except that it covers the entire toilet. When pressed down, air is pushed straight into the tube, creating a pressure difference.

After that, the elastic force will pull the patch up, creating the attraction that acts on the object to block. Working over and over several times, the toilet will suddenly drain as if nothing has happened.

And now, let's watch the video below to see more clearly the whole process.

However, a special note that you "must remember" is to seal the tape on the toilet surface tightly. If you don't stick it well, the consequences will become "catastrophic" very much!