7 mistakes when using the high speed can cause the electric drive to explode, causing harm to the whole family

Super speed kettle is probably an indispensable item for every family. I can't deny its convenience when it only takes a few minutes to have a boiling water bottle to make tea, receive guests .

But it is convenient, but many people make mistakes when using this familiar item, so they cause trouble for the whole family. What is that mistake, check now to see if you are suffering or not!

1. Cook water with constant speed

The kettle is already warm, so it is more convenient to cook a few more pots of water to save electricity than to think of many people. But do you have a good time, the continuous cooking of water will cause the heat of the kettle too hot, leading to rapid fire?

The best way is to leave a warm interval between warming times so that the lower heat tray cools down.

Many cases of water heating for a long time, the thermal relay will automatically disconnect the circuit that the kettle stops working. At this time, even if you try to plug the power plug into the source, the lamp will not light up. What you need to do is wait for a warm time to cool down before you can continue!

2. Use speed to cook food

Remember the speed is born to boil water, not to cook food like boiled eggs, cook soup, boil meat .

This will cause the fat, food residue to become warm, thereby reducing the life of the product only. Not only that, cooking in the fast food is not sure to make the food fully cooked.

3. When the boiling water is finished, empty the warm water

We often have the habit of pouring out the warm water after the water has boiled. This job needs to be removed immediately. The reason is because when the kettle is boiling, even if the switch is off, the heat sink continues to produce heat.

If you don't leave the water in the kettle, the heat tray is very fast. For that reason, you should leave about 20 ml of water in the kettle, wait until it has cooled, then drain.

4. Do not cover or cover tightly when boiling water

Making this mistake both consumes electricity and takes more time to boil water. The high speed kettle is designed to automatically disconnect the power source only when the lid is closed.

Therefore, if the water is boiling without being disconnected, the risk of fire and explosion is extremely high.

5. Heat too little water or too much water once

On each super-fast kettle, the manufacturer specifies the maximum amount of water (Max) and the minimum amount of water (Min), enabling the person to observe the outside to pour the appropriate amount of water. Boiling too little makes it warm and shallow, perishable, too much, when the boiling water is easy to shoot out, causing burns.

6. To warm the scale, do not clean regularly

Do you just boil clean water so you don't need to clean it? This thought will make the bacteria harmful, or the warmth has the opportunity to multiply more. To ensure safety, you should clean warm once a week.

You can use vinegar with water mixed at 1: 1 ratio, pour about 1/2 warm and shake gently. Next, boil the water, soak the solution for 10-20 minutes and then pour it away, rinse with clean water as clean as new. Or you can cut a few slices of lemon and put it in a super kettle, let it cool and then boil it!

7. Plug warmly with many other electrical devices

The electric kettle has a high capacity, so you should plug it into a separate socket for safety.

In addition, you should not just cook water, cook rice, and turn on the electric stove, iron, washing machine or water heater at the same time because these electrical appliances have high capacity, can cause overload, automatic disconnecting the power or more seriously can cause an explosion.

1. How to clean the scale in the kettle quickly