Install the seat belt properly

The seat belt does not tighten above the abdomen, where the stomach is tied to the lower abdomen, especially for pregnant women.

Invented in the early 19th century, seat belts became standard equipment on most cars in the 1960s. The idea of ​​a seat belt was simple, keeping the victim from crashing into the glass, bouncing- lot or hit the steering wheel when the car stops suddenly.

Structure and principle of operation are simple, but to be effective, it is necessary to install seat belts properly. Here's how to install a seat belt according to howcast.

Seat belts become standard equipment on most cars in the 1960s.

Step 1: Pull the seat belt over

Sitting in any seat in the car also needs a 3-point fixed seat belt. If the seat belt is too short, you can buy an extension. Make sure the latch is fixed properly.

Step 2: Adjust the lower belt

Pull the lower belt through the lower abdomen and pelvis, do not put the seat belt up high in the stomach position. Pregnant women should wear them downwards, not horizontal or above the belly.

Step 3: Adjust the upper belt

Adjust the straps over the shoulders and body, fit neatly on the collarbone and chest, without pressing on the neck and face. Do not leave the belt behind, or under the arm.

Step 4: Check before driving