This is how countries around the world find students sleeping on buses

In order to prevent students from falling asleep on the school bus causing unfortunate consequences, many countries around the world have taken effective measures, from manual to modern technology installation.

In order to prevent students from falling asleep on the school bus causing unfortunate consequences, many countries around the world have taken effective measures, from manual to modern technology installation.

In Australia , the school bus inspection system began to apply in 2014, according to Schoolbusfleet. Child testing equipment reminds school bus drivers to check whether any children fall asleep at the end of a turn.

Picture 1 of This is how countries around the world find students sleeping on buses

Many countries around the world apply effective measures to avoid neglecting students on buses.

Canada applies two ways to detect children sleeping on school buses, depending on the bus company. The first way is to install a bell to remind the driver to check the vehicle every turn. This alarm can only be disabled by pressing a button at the end of the bus. It forces the driver to move to the end of the vehicle to turn off the alarm and can detect any children left behind in the car. If the driver does not do this at the end of the shift, the horn and the light of the car will sound ceaselessly, drawing the attention of any pedestrian as well as the driver himself.

The second way is more manual when using "flags" and "signs" at the end of the bus. After each run, the driver is required to walk to the end of the car to flip the "empty bus" sign, according to Pressfrom.

Picture 2 of This is how countries around the world find students sleeping on buses

The bus warning system can only be turned off by clicking on the button at the end of the car.

Similarly, in the United States , to ensure the safety of children, school buses are equipped with a warning system to prevent neglected children in the car, such as a car-moving system. This system will continuously scan motion for hours after the bus stops.

In addition, the bus is equipped with an upgraded alarm system, called the Young Test , which reminds bus drivers to check the status of students to make sure no children are left behind. car, according to NBC.

If a driver tries to leave the vehicle without turning off the security system, the siren will sound for half an hour or until the driver completes the vehicle inspection. This warning system can only be turned off manually at the back of the vehicle.

Besides, in New York City, a similar manual method was applied in Canada, the school bus drivers were asked to turn on the sign saying "I confirm that this car has been checked for children. overslept "at the end of each trip. This means that the driver must walk down to the end of the car, check each seat to see if any child is sleeping and put a sign on the window behind the car before taking the car to the yard.

Picture 3 of This is how countries around the world find students sleeping on buses

Picture 4 of This is how countries around the world find students sleeping on buses

A sign "I certify that this car has been tested for sleeping children" is located at the end of the bus window in Ho Chi Minh City.New York, USA.

In 2015, the United Arab Emirates (UAE) installed a check button for sleeping children on school buses after the death of a 4-year-old student on a school bus. A court in Abu Dhabi condemned three people involved in the case and ordered the school to be closed for students to die.

In addition, the camera is also installed on the school bus to enhance security and monitoring. And yet, the ranks are also granted access to a dedicated mobile application through which they can track buses and routes to their children's schools and can immediately appeal the pickup and return. My children go to school or go home.

In Korea , in mid-April this year, the authorities issued a regulation requiring all schools and day care facilities to install systems to detect children sleeping on shuttles to avoid school. If children fall asleep, be left alone in the car. Within 3 minutes after the vehicle has stopped, the driver will take a round of inspection and then press the button at the end of the car.

The system then automatically detects the remaining students thanks to the devices mounted both inside and outside the vehicle. The results will be sent to the phone of the driver, parent and administrator at the school. In case the driver does not take the test steps, the system will also send a warning to the student's parents and the school. In addition, the driver may be fined up to 130,000 won (about 100.8 USD).

  • How to leave a child alone in a car in hot weather?
  • Why sleep in cars is deadly?
Update 08 August 2019
« PREV
NEXT »
Category

Technology

Life

Discover science

Medicine - Health

Event

Entertainment