Fix the problem of gas stove

When using a gas stove, if it does not catch fire, has a gas smell, or fire is not normal, it is necessary to turn off the stove and check again to ensure safety.

Parts of gas stoves seen outside include: Fire throat (also known as lotus flower), tripod legs, bowls, ignition buttons.

If you notice an abnormal fire, lock the gas valve immediately and check the stove again. If a fire is not detected properly, remove the fire throat and wash it with clean water. Also, you need to observe whether the fire exit slot on the fire throat is blocked or not.

If the fire throat is blocked, you can use sharp pins or wire brushes to clean the fire escape slot. After cleaning, dry the fire throat before reinstalling it, and turn on the stove continuously to see if it is working properly. If the ignition is dirty, turning on the stove is also difficult. Therefore, you should thoroughly check this part by removing the kitchen case and if dirt is detected, wipe it off with a dry cloth.

Currently, most gas cylinders are installed safety valves so that when the incident occurs, the valve will automatically shut off the gas supply to the kitchen. However, this safety device also cannot guarantee absolute safety. Therefore, you need to be proactive in ensuring safety in gas use.

Common gas stove problems

Gas stove does not catch fire : This phenomenon is largely due to the gas pipes with air, gas wires are inserted or broken, the ignition parts are dirty . To overcome the situation of gas pipes have air, you just need to repeat the turn on until the air in the gas pipe is expelled. For broken wire, you should replace it to ensure safety.

Smell gas : The cause of this phenomenon may be due to leaky gas conductor, improper gas pipe connection, gas lock valve is broken . When this problem is detected, you should inform the team. Gas company technology that the family is using to be promptly repaired.

Fired fire : This phenomenon is often caused by employees installing gas stoves that have not correctly adjusted the air regulator, the fire throat is not properly fitted, the fire escape slot of the fire throat is blocked. When you encounter this problem, you can handle it yourself by adjusting the exact air regulator, rechecking the position of the fire throat, and cleaning the fire exit slot again.