What is Cloramin B? How to mix Chloramin B to sterilize and kill bacteria

Chloramin b is a chemical with a predominant chemical composition of sodium benzensulfochleramin (formula C ₆ H ₅ SO ₂ NClNa.3H ₂ 0). In which, active chlorine accounts for about 25%. The chemical is usually in the form of landmines, typical chlorine odor, silvery white.

With the formula C ₆ H ₅ SO ₂ NClNa.3H ₂ 0, this compound contains very active positive chloride ions. It kills bacterial cells in the air and water.

What is CloraminB?

CloraminB is a chemical used to kill many types of bacteria on the surface such as floors, tables and chairs, stair handrails, door handles, items, toys, etc. Humans are exposed and have the ability to bring bacteria into the body very high.

CloraminB is a widely used chemical for killing bacteria.

The most effective use of Cloramin B

When it comes to Cloramin B, its main use is bactericidal . Cloramin B is capable of killing up to 99.9% of broad-spectrum bacteria, fungi, spores and viruses.

However, Cloramin B is only capable of killing bacteria for a time only because positive Cl + ions are easily decomposed under the effect of light. So need to use repeating .

How to mix Chloramin B solution

To make a solution of Cloramin B solution effectively, you need to pay attention to the following formula:

Amount of chemicals to be mixed = (Concentration of active chlorine of solution to be mixed x Number of liters: Active chlorine content of chemicals used) x 1000

Inside:

1. Amount of chemicals to be mixed : this is the amount of chemicals you add to water to make, in grams.
2. The active chlorine concentration of the solution to be mixed: is the concentration of the solution after you mix. Here we mixed the concentration of 0.5% is good bactericidal. Be careful not to mix more than 2% that can cause poisoning.
3. Number of liters : is the number of liters of solution you want to mix. It depends on how much you clean.
4. Active chlorine content of chemicals used : this is indicated by the manufacturer on the package label or instructions for use. Chloramin B powder for disinfection is usually 25%

For example: To mix 10 liters of a solution with 0.5% active chlorine concentration from chloramin B powder 25% active chlorine, it is necessary: ​​(0.5 x 10/25) x 1000 = 200 grams.

1. Take 200 grams of chloramin B powder mixed into 10 liters of water, completely dissolve immediately to have 10 liters of solution with a concentration of 0.5%.

If you want to make effective way of mixing chloramin B, you need to pay attention because this is a fast-acting and powerful chemical, so when it is finished, it must be used immediately but not for more than 24 hours , the chemical will lose its wasteful effect.

Attention should be paid to the correct preparation according to the above formula to avoid occurrence of unnecessary poisoning cases .

Table of available dosage of chlorine solution from disinfectant chemicals.

How to use Chloramin B

1. Weekly disinfection (in case there are no sick children) : soak toys, exposed objects, clean the floor and children's areas with Chloramin B solution, mix one teaspoon in 1 liter of water.
2. Daily disinfection (in case of sick children) : disinfection must be done daily for 10 to 15 days. Mix 5 teaspoons of chloramin B powder in 1 liter of water. Diseased toys and supplies must be disinfected immediately after playing or using them.

Steps to disinfect toys, supplies and houses properly:

1. Step 1 : Clean, wash away dust, dirt on the surfaces of young objects that are often in contact, living, sleeping, and floors before disinfecting.
2. Step 2 : Wipe the floor, utensils ., soak toys in disinfectant solution was mixed, leave for 10 - 20 minutes.
3. Step 3: Wipe with clean water and wipe dry. With children's toys, rinse with clean water and dry.

Note :

After mixing chloramin B to prevent hand, foot and mouth disease, you should use two separate buckets or buckets: one for containing water mixed with disinfectant solution, and one containing clean water for flushing.

Wipes should also use two separate pieces: one to wipe disinfectant, one to wipe back, dry. When the disinfectant or rinse solution is dirty or cloudy, change the solution or other water.

Do not take advantage of disinfecting toys, utensils to clean the house because this solution is not enough disinfectant effect now.