Why does hot lumps reconfigure water?

Water flow in hot water is one of the most common phenomena during use. However, this problem is not too serious but it is not comfortable for users.

Water flow in hot water is one of the most common phenomena during use. However, this problem is not too serious but it is not comfortable for users.

So, in order to understand the causes of water regulation in the hot zone and how to fix it, let's learn some information right away.

The cause of regulating water flow in hot spots

1. Drainage pipe is broken

This is one of the most common and common phenomena that is one of the basic causes of regulating water flow in hot spots. Air conditioner after using for a long time, the moisture in the room is separated from the air before falling to the indoor unit and dripping down the water trough to form a flow through the drainage pipe. When the drainage pipe breaks, the flow will escape. At this point, you need to contact the air conditioning repair technique to be overcome promptly.

Picture 1 of Why does hot lumps reconfigure water?

A broken drainage pipe is one of the common causes of hot water regulation.

2. The indoor unit is covered with dust

Long-term air conditioner is not cleaned, periodic maintenance will cause dirt to fill the indoor unit causing the situation of clogging drains. If the drain hose is blocked, you only need to clean the indoor unit and the outdoor unit. Remove the dust net with a spray hose to dry and reattach it.

3. Air conditioning non-gas

This is also one of the causes of regulating water flow in hot spots. Air conditioners are not gas will lead to ice phenomenon inside the indoor unit, the air conditioner does not guarantee enough temperature and makes the stone melt through the trough of water and spill out. For these cases, you can't handle it yourself but need help with the air conditioning repair technician to get it fixed in time.

4. Poor installation error

Water flow regulation in hot spots may also be due to poor installation errors. During the installation process, do not install water pipes without a slope or pipes that are too long and without ventilation holes. Water that is not drained out and flows back to the condenser containing water causes water leakage.

Remedy to regulate water flow in hot areas

Water flow regulation in hot spots can be caused by many different causes. At this point, you need to find a way to fix it in time, ensuring stable operation and avoiding causing unfortunate incidents.

Picture 2 of Why does hot lumps reconfigure water?

Water flow regulation in hot spots may also be due to poor installation errors.

  • Air conditioner in the hot zone due to broken drainage pipe, you only need to replace the new pipe.
  • Regulating water flow in hot areas due to clogging of drainage pipes, only need to conduct sanitation is the air conditioner can operate stably.
  • Non-air conditioning leads to hot water flow and you cannot remedy it. At this point, you need to ask for help from the air conditioner repair technician to get it fixed in time.
Update 18 December 2018
« PREV
NEXT »
Category

Technology

Life

Discover science

Medicine - Health

Event

Entertainment