Skill of dumping by scooter in Vietnam

After leaving the car drifting to 15-20km / h, the gas will be accelerated, and the brakes will be used to pull, then drop both, the vehicle will automatically brake the engine like on a digital car.

Skill of safe pass by scooter

Sloping terrain makes station vehicles often not a priority option for mountain roads. However, in many cases this is the only means. If the vehicle gives the driver a sense of security when they can use the numbers 1, 2, 3, 4 . to pin the speed in the type of engine brakes, then the scooter does not have those options. So how to dump a safe train pass?

According to those who have the skills and experience of running many scooters in mountain passes, station cars can be braked by engines like digital cars. In fact, the engine brake station is taking advantage of the grip of the taper to keep the car at a certain speed, safe enough. The steps are as follows:

Step 1: Explode the device

The first thing to note is that you should never turn off the machine when you downhill. Because, if the engine is turned off, the car will only move on two wheels at this time, which has nothing to do with the gearbox, engine structure.

Cars drift down the slope similar to dropping tires, balls, balls rolling freely from the top of the slope to the slope. The bigger the weight of the vehicle and the occupant, the greater the inertia, so the speed of drifting is getting faster and faster. At that time, the brakes lose its effect, the road grip is reduced, the car cannot decelerate as desired when having a bend or stopping.

Step 2: Create gas

When falling, safety is more important than speed. Therefore, how the car downhill in the driver's ability to control is most important. When the engine is turned on, let the vehicle drift to a speed of about 15-20km / h. After checking the brakes, the engine will continue to allow the tire to stick, finally release the brakes and gas, the vehicle will automatically brake the engine.

• Things to know when driving a car during the rainy season

At this point, the car will continue to be pinned at the same speed as before releasing the brakes and gas, because the cones have clung, creating friction, creating " engine brakes" . Thus, even if the driver does not brake, he still maintains a reasonable speed.

In this step, if you release all the gas from the beginning, the car will be downhill similar to the case of a shutdown, no force will be stopped. When the speed is too low, about 15 km / h or less, the mechanism of the station car is to automatically disconnect the vehicle from drifting inertia. Therefore, if the car does not start at the beginning, the car will keep drifting.

Step 3: Maintain speed

On the impact of the slope and weight, the vehicle will gradually push up the speed when downhill. Therefore, drivers should pay attention to occasional braking to bring the car to a safe speed, usually around 30-40 km / h depending on the terrain.

When you encounter the parts of the sleeve that need to be braked to a very slow speed as it is about to stop, then after the crab exit, continue to do the same as in step 2 to set the safe speed again.

Step 4: Do not continuously scan the brakes

Do not float or gas too much, so the speed of the trolley is too high, so the driver must check the brakes with great pressure, continuously to slow down. Working under constant intensity will cause brake pads and brake discs to wear, losing grip even burning brakes. This is a common situation in passenger cars that crash on steep slopes.

Step 5: Equip mountain road skills

In addition to the 4 steps to control the speed as above, the driver needs to equip with other skills to run the mountain road if he wants to ride by safe train. It is the skill of going right lane, cornering, walking, watching .