Causes and ways to fix computers not on Facebook

Here are ways to overcome your network access to quickly and stably the latest 2018, successfully applied to the network, invite you to consult.

If you are unable to connect to the internet, the reason is probably the service provider.

The reason why your computer cannot access the internet even though you have pinged the LAN and the WAN is still available, but the browser access is not networked. To fix every time the computer cannot access the internet, please see the error correction in one of the following simple ways.

1. Restart wifi device: modem, router

If you are unable to connect to the internet, the reason is probably the service provider. To determine, check Modem and Router. Please observe 4 lights: Power, Data, Lan and Link . If you see an active data light (Data) blinking, it is likely that the reason for not connecting to the internet is the service provider.

Try to fix this error by turning it off and then re-enabling the Modem because, like the computer, sometimes the error can be fixed by restarting. Another way to try to fix this error is to try clicking the hard reset button on the modem, however, then you will have to manually reconfigure the router page on your machine.

2. Reset the static IP to the computer

Step 1 : Right-click the network icon and select Open Network And Sharing Center.

Step 2 : Select Change adapter settings.

Step 3 : Right-click on the connected wifi and select Properties.

Step 4 : Double-click Internet Protocol Version 4 (TCP / IPv4) .

Step 5 : In the Internet Protocol Version 4 dialog box, select the Use the folowing IP address line.

IP address : is the parameter of the modem. 192.168.1 is required, you can only change the last number in the range. Such as 192.168.1.16 or 192.168.1.20 .

Default Gatewa y: Enter the IP address used to access the administration part of the modem, enter 192.168.1.1.

Continue to select Use the folowing DNS server addresses and fill the DNS of google as 8.8.8.8 and 8.8.4.4.

Select OK .

3. Use commands in DOS

Go to Search type cmd and right click on Command Prompt-> Run as administrator.

In Administrator: Comman Prompt type the netsh winsock reset command .

Continue the netsh int ip reset reset.log command

Then restart the computer is in.

4. Activate the mode from Disable to Enable

Many cases have disabled the network mode so that the computer cannot access the network. Please enable Disable by Enable mode by: Right-clicking the network icon -> Open Network and Sharing Center-> Change adapter settings-> Right-click on the network to switch Disable to Enable.

5. Do not install the network card driver for the computer

If not, check if your computer has installed network driver or not to check you perform as follows:

Right-click Computer-> Manage-> Device manager-> Network adapters.

6. Because the virus blocks the port, it cannot access the network

If there are multiple computers sharing the same network, including one computer that cannot access the network, it is most likely due to a software error on the computer, a virus, a faulty network card driver or a browser. To solve this problem, the first step is to perform a virus scan on your computer.

Use anti-virus software to scan every time your computer has a network error. The only thing that helps protect your computer effectively and re-enters the network successfully.

The above are ways to fix access to facebook errors, besides there is another way that you can access facebook by phone, you absolutely do not have to worry about facebook will be blocked or error anymore.