Motorcycle kits and common damage

It is difficult to start the car, the operation is flickering, there is a screeching sound when the thread is damaged.

>> Note when driving on a drizzle

Thread maintenance is required with periodic vehicle maintenance

The theme has a very important meaning, taking on the starting function and improving the comfort of the car. For some current cars like Honda Lead, SCR, . the only part to start the engine is the thread.

Normally, the problem that follows the car rarely occurs, and the durability is quite high. However, if used improperly, do not check for regular maintenance, it is likely that one day you will have to pay for it.Knowing and understanding the following signs of an unusual title will help you determine the time it takes to check, maintain or replace it early . Note that the following signs of failure have eliminated battery and generator problems.

Brushed brush

In any common electric motor it is necessary to have a brush and a motorcycle theme is no exception.When the brush wear is much, not maintained, periodic cleaning, the dust particles generated by brush will stick to the permanent magnet which is fixed to the thread housing (stator).

Too dirty threads cause jams or destruction of magnets

The mites are getting more and more, the gap between the rotor surface and the stator will decrease, as long as the gap is small enough and the amount of mites will suffice, causing the stator's magnet bubble to cause problems. In other cases, the brush is too worn, the layer of dust mite on the commutator will cause flickering when using.

Broken relay

Relays are responsible for suction release so that the teeth ring fits into the engine starting ring. The sign of the relay is not working well, and you will hear the crackling sound continuously when doing the publication. The reason is, the power supply to the suction coil is unstable when passing through the relay, causing a continuous release. This can lead to slipping, broken teeth and affecting the quality of threads. When the above phenomenon needs to take the car to the brand to check and replace.

Problem

When it comes to things, not only does the machine not explode but there is also the phenomenon of unusual gear bumping on the engine side, which sounds very jarring . That is the phenomenon of problem. The cause of this phenomenon is the wrong ignition timing IC or wrong cam after the overhaul. Specifically, the timing of ignition is too early, igniting before the early ignition time of the engine causes an explosion phenomenon (the direction of rotation of the motor against the direction of rotation of the engine), which easily leads to a batch of teeth. , broken teeth, deformed teeth or destroyed threads. Need to bring to the prestigious brand to conduct inspection and adjust immediately when the phenomenon is on.

Carbon brushes can be stuck without regular maintenance

Han rusted

The connections from the battery output and the thread input are where it is likely to occur, oxidation rust causes poor contact, the current supplied to the small thread is not enough to create a large torque. to start the engine . Most types of clamps, or screws, that make these connections are not copper or aluminum, are quickly prone to rust, and rust affects the quality of the starting current. It is recommended to regularly check and clean these joints to ensure good contact.

Regular and periodic maintenance of the bulb tips (carried out together with vehicle maintenance) not only helps maintain good working capacity and increases its lifespan but also saves the cost when damage occurs.